煤矿破碎机人员安全探测系统的研制

文中给出了煤矿人员安全探测系统设计的性能要求，详细介绍系统的硬件设计和软件设计。对利用热释电传感器实现人员定位与移动相对位置匹配算法设计进行深入细致的讨论．从防止漏报警、提高系统可靠性和降低系统功耗三个方面探讨了设计中涉及到的关键技术及其具体解决方法、与其他报警和定位系统相比，系统具有结构简单、成本低、功耗小、定位准确的特点。     

.NET组件和COM组件的应用集合研究

组件对象模型（COM）为代码的重用性提供了一种模块化和面向对象的技术标准。.NET组件是微软公司在 .NET平台上发布的新一代组件模型。文中介绍了 .NET组件和COM组件的互操作性以及 .NET组件的原理和体系结构，并以手机接口平台为技术背景，讨论了如何在两个不同平台上对COM和 .NET组件进行融合，针对此类应用提出了系统设计、体系结构和功能构成等应用方案，较详细地讨论了在非 .NET平台上调用.NET组件。     

异喹啉的脉冲辐解和激光光解研究

用脉冲辐解和激光光解相结合,研究了异喹啉这种难降解杂环化合物在紫外光作用下的变化和与HO·的反应.结果表明,在波长为266nm的激光作用下,异喹啉不仅发生光激发,而且发生单光子电离,其量子产额为1.58×10-4.异喹啉光电离产生的阳离子自由基可以脱去质子,其pKa为5.50.异喹啉可以与HO·发生反应,其反应速率常数为3.4×109 mol-1·dm3·s-1.本工作的研究将为photo-Fenton法降解异喹啉提供理论上的依据.     

Local residence time,residence revolution,and residence volume distributions in twin‐screw extruders

This work was aimed at studying the overall, partial, and local residence time distributions (RTD); overall, partial and local residence revolution distributions (RRD) and overall, partial and local residence volume distributions (RVD) in a co‐rotating twin screw extruder, on the one hand; and establishing the relationships among them, on the other hand. Emphasis was placed on the effects of the type and geometry of mixing elements (a gear block and various types of kneading elements differing in staggering angle) and process parameters on the RTD, RRD and RVD. The overall and partial RTD were directly measured in‐line during the extrusion process and the local ones were calculated by deconvolution based on a statistical theory. The local RTD allowed comparing the mixing performance of mixing elements. Also it was confirmed both experimentally and theoretically that specific throughput, defined as a ratio of throughput (Q) over screw speed (N), controlled all the above three types of residence distributions, be they local, partial or overall. The RRD and RVD do not provide more information on an extrusion process than the corresponding RTD. Rather they are different ways of representing the same phenomena. POLYM. ENG. SCI., 48:19–28, 2008. © 2007 Society of Plastics Engineers     

企业以顾客为中心的营销策略过程研究

试图构建企业以顾客为中心的营销策略过程的一般模型，并利用已有的研究成果对其构成要素进行了深入分析．在此基础上，对此模型所形成的企业营销策略循环进行分类分析，并以实例说明它们所代表的现实意义，从而为企业的决策提供帮助．     

Research on charge ordering and magnetic properties in La0.3Ca0.7Mn1-xWxO3 system

The perovskite manganite sample La0.3Ca0.7Mn1-xWxO3 （x = 0.08, 0.12） was prepared by the solid-state reaction method. The effect of W doping on the Mn site to La0.3Ca0.7MnO3 charge ordering phase and the changing process of magnetic properties were studied through the measurement of the M-T curve, M-H curves, and ESR curves of the sample. The results showed that when x = 0.08, the charge ordering （CO） phase exists in the system, the transition temperature Tco= 275 K, and the system exhibits PM when T 〉 275 K. The system transforms from spin-disordering paramagnetism to spin-ordering antiferromagnetism in the charge ordering state with the temperature decreasing from 275 K to 230 K. The long-range antiferromagnetism forms and AFM/CO states coexist between 230 K and 5 K. There is a little ferromagnetic component in the AFM/CO background in a low temperature range. When x = 0.12, the CO phase in the system has almost melted completely. There is a little remnant of the CO phase below 150 K. The system exhibits paramagnetism when T 〉 150 K and transforms from paramagnetism to ferromagnetism when T〈 150 K.     

Time Characterization of High Density Gas Jet from a Pulsed Supersonic Nozzle via Laser Produced Plasma

A high-density gas jet supersonic nozzle is reported in this paper. The jitter and actuation time of the nozzle is determined by the pin discharge and laser spark radiation respectively. The jitter time of the nozzle is within 10μs with the backing pressure as high as 25 bar. With a nanosecond laser pulse focused on the gas jet about 1 mm below the nozzle, the actuation time is calculated to be about 15 ms by detecting the laser produced spark radiation, which reveals the existence of the gas jet and the relative gas density evolving with time. Consequently the gas density is estimated to be well above 10^19 cm^-3, compared with theoretical simulations from the nozzle parameters.     

One-to-Many and Many-to-One Optical Chaos Communications Using Semiconductor Lasers

A theoretical construction of one-to-many (OTM) and many-to-one (MTO) chaos synchronization communications using semiconductor lasers is presented. One center laser provides strong injections (strong link) to other side lasers, and the side lasers also provide weak injections (weak link) to the center one. Simulation results show that the side lasers synchronize with the center laser through injection-locking. In addition, messages transmitted via the strong links or the weak links experience strong chaos pass filtering, enabling us to realize OTM and MTO communications.